Left Lower Cover
Caution Be careful not to damage the plastic guides on the inside of the lower left cover. They are part of the Duplex Unit paper path.
1 Remove the Diverter Assembly access door (see Figure 6-13). 2 Remove (2) screws, CH102 (Figure 6-7, callout 1) 3 Press down firmly on the top cover outer ends to release the retaining tabs
on the inside of the cover (Figure 6-7, callout 2), and the retaining tabs at the lower edge of the cover (Figure 6-7, callout 3). 4 Pull the cover away from the chassis, left side first. To Reinstall:
1 Tuck the right side of the cover behind the plastic edge piece first. 2 Slide the cover toward the chassis and insert the two retaining tabs into
position. Lift up to snap the cover into place. Figure 6-7
